- CentOS
- (사전작업) JDK 설치 [[CentOS Java 설치]]
```Shell

# 필수 패키지 설치
yum install -y gcc gcc-c++ libgcc libstdc++ libstdc++-devel compat-libstdc++ libaio libaio-devel pstack libpthread librt libm libaio libdl

yum install -y gcc
yum install -y gcc-c++
yum install -y libgcc
yum install -y libstdc++
yum install -y libstdc++-devel
yum install -y libaio
yum install -y libaio-devel

# compat-libstdc++ 수동으로 다운로드해서 설치
rpm -ivh /tmp/tmp/tibero_pac/temp/compat-libstdc++-33-3.2.3-72.el7.x86_64.rpm

yum install -y pstack -> gdb dstat
yum install -y libpthread
yum install -y librt
yum install -y libm
yum install -y libdl

## RHEL 8.1 이상은 아래 추가 설치
	yum install -y libnsl.so.1 -> libnsl
	
	# 직접 설치해야 함
	# yum install -y libncurses.so.5
rpm -ivh /tmp/tibero_pac/libgcc-11.3.1-2.1.el9.i686.rpm &&
rpm -ivh /tmp/tibero_pac/glibc-2.34-40.el9.i686.rpm &&
rpm -ivh /tmp/tibero_pac/glibc-gconv-extra-2.34-40.el9.i686.rpm  &&
rpm -ivh /tmp/tibero_pac/libstdc++-11.3.1-2.1.el9.i686.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-libs-6.2-8.20210508.el9.i686.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-term-6.2-8.20210508.el9.noarch.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-base-6.2-8.20210508.el9.noarch.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-libs-6.2-8.20210508.el9.x86_64.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-6.2-8.20210508.el9.x86_64.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-c++-libs-6.2-8.20210508.el9.i686.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-c++-libs-6.2-8.20210508.el9.x86_64.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-c++-libs-6.2-8.20210508.el9.x86_64.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-devel-6.2-8.20210508.el9.x86_64.rpm &&
rpm -ivh /tmp/tibero_pac/ncurses-devel-6.2-8.20210508.el9.i686.rpm

	yum install -y libgcc
	yum install -y glibc
	yum install -y glibc-gconv-extra
	yum install -y libstdc++
	yum install -y ncurses-libs
	yum install -y ncurses-term
	yum install -y ncurses-base
	yum install -y ncurses-libs
	yum install -y ncurses
	yum install -y ncurses-c++-lib
	
## 링크 생성
ln -s /usr/lib64/libncurses.so.6 /usr/lib64/libncurses.so.5
ln -s /usr/lib64/libtinfo.so.6 /usr/lib64/libtinfo.so.5

---------------------------------------------------------------------------------
# JAVA 설치
# JDK 설치 가능한 버전 확인
yum list java*jdk

# JDK 1.8 설치
yum install -y java-1.8.0-openjdk.x86_64

# java 설치 경로를 확인 (맨위의 폴더)
ls -l /usr/lib/jvm/

# 환경변수 설정 (파일의 맨 하단에 추가)
vi /etc/profile
 > export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.222.b10-0.el7_6.x86_64
>  export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.352.b08-2.el7_9.x86_64
# 환경변수 반영
source /etc/profile
------------------------------------------------------------------------------

# 메모리확인(byte)
## total의 Mem 확인 
free -b
## Page size 확인 ( 4096 byte = 32768B)
getconf PAGESIZE |sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{3\}\)/\1.\2/;ta'

# 커널 파라미터 설정
sudo nano /etc/sysctl.conf

	kernel.sem = 10000 32000 10000 10000
	kernel.shmall = 1976652500
	kernel.shmmax = 8096368640
	kernel.shmmni = 4096
	fs.file-max = 67108864
	fs.aio-max-nr = 1048576
	net.ipv4.ip_local_port_range = 1024 65000

# 커널 파라미터 설정 적용
sudo sysctl -p


#  Shell Limits 파라미터 설정
/etc/security/limits.conf
----------------------------
MAX_SESSION_COUNT=20 이상
----------------------------
	*                soft    nofile          65536
	*                hard    nofile          65536
	*                soft    nproc           65536
	*                hard    nproc           65536


## RHEL 7.2 이상 버전부터는 아래 커널 파라미터 설정이 필요
vi /etc/systemd/logind.conf
	RemoveIPC=no


mkdir /etc/tibero
tar -zxvf tibero7.tar.gz

# /license 폴더에 licence.xml 복사

# 환경변수 설정
export TB_HOME=/home/tibero/tibero7
export TB_SID=sacp
export PATH=.:$TB_HOME/bin:$TB_HOME/client/bin:$PATH
export LD_LIBRARY_PATH=$TB_HOME/lib:$TB_HOME/client/lib:$LD_LIBRARY_PATH
export SHLIB_PATH=$LD_LIBRARY_PATH:$SHLIB_PATH
export LIBPATH=$LD_LIBRARY_PATH:$LIBPATH

# 라이선스 복사
$TB_HOME/license

# gen_tip 실행
cd $TB_HOME/config
./gen_tip.sh

# 마운트 모드로 가동
cd $TB_HOME/bin > tbboot nomount

# sys 접속후 테이블 스페이스 생성
cd $TM_HOM/bin > tbsql sys/tibero

# 재기동
cd $TM_HOM/bin > tbdown
cd $TM_HOM/bin > tbboot

# 포트번호 변경
nano $TB_HOME/config/$TB_SID.tip
nano $TB_HOME/client/config/tbdsn.tbr

# system.sh 실행
cd $TB_HOME/scripts
./system.sh -p1 tibero -p2 syscat -a1 y -a2 y -a3 y -a4 y


# 프로세스 확인
ps -ef | grep tbsvr
$TB_HOME

```


```Shell
기본 포트 : 8629

# 포트번호 변경
vi $TB_HOME/config/$TB_SID.tip

# 특정 포트 허용
firewall-cmd --permanent --zone=public --add-port=18629/tcp

# firewall 설정 적용
firewall-cmd --reload
```